Description

Classic

Sandblast Cameo Rose Internal Door

Classic style, 2 panel Sandblasted Cameo Rose UpVC door.
Top panel has an attractive Victorian style etching on the glass sandblasted for an obscured effect. Bottom panel is a solid with dimensions of 500mm in height and 545mm in width.
35mm standard thickness to suit any door set. 70mm Sub frame allows trimming up to 25mm per side making the door able to fit almost any doorway.

Please Allow 10 Working Days for Delivery.

To Download a Brochure Click Here

Fitting Instructions

1              Measure your opening of the door and input the sizes on the website to the widest of the opening. (if you are replacing your doors measure the size of your old doors.)

2              Offer door to the opening

3              Whilst measuring the height of the frame check the head of the frame and the floor with a spirit level to check if they are running out.

4              Providing the door is not a good fit, the door will have to be trimmed and tapered into the door frame accordingly. This is usually done with an electric plainer or handsaw.

5              Offer the door into the frame to check the width. If the door is too big, just repeat the process of trimming the top to the side of the door. If it’s a good fit place a packer under the door to visualise the door hanging naturally for clearance whilst adding pressure to the hinged side. This way any frame that is running out will be high lighted with this process

6              Once you have acknowledged which side the hinges are to be on the door, you then apply the plastic edge strip. When the door is placed in the frame mark the position of the hinges are going to be with a pencil. This process should take place with a packer underneath the door. Then fit the hinges to the door.

7              Check the hinges pocket is 5/8^th inch to the door jam. Offer the door up to the aperture at right angles to the hinge pocket. Drill holes if necessary or use existing holes and fit the door to the frame.

8              Once the door is hung drill out for the latch and handle, (this will vary in height and depth per handle and property)

Please not that these fitting instructions are for reference only. These PVC Internal doors are fitted the same way as a conventional wooden internal door.