Description
Soadafoam 2K Expanding Foam Filler Handy size 150ml
DESCRIPTION
Soudafoam 2K is a
two-component, self expanding, ready-to-use polyurethane foam. Due the high
strength is it typically foam for mounting. Two component, nozzle applied,
expanding polyurethane foam filler. Extra fast curing speed (approximately
20 minutes). Excellent thermal and acoustic insulation properties. Expands
to 25 times its initial volume. Primer less adhesion on most construction
materials. B3 Fire Rated.
CHARACTERISTICS
- Professional quality
- Fast curing, not dependant on atmospheric moisture
- Excellent adhesion on most materials (except Teflon, PE and PP)
- High thermal and acoustical isolation
- Excellent fixing capacities
- Very high adhesive strength
- High form stability (no shrinking or post expansion)
- Can be trimmed after 30 minutes (20°C)
APPLICATIONS
- Installing of window-
and doorframes
- Filling of cavities
- Sealing of all openings in roof constructions
- Creation of a soundproof screen
- Application of a soundproofing layer on motors
- Improving insulation in cooling systems
DIRECTIONS FOR
USE
Can temperature
should be between +10°C and +25°C. surfaces have to be dust and grease free.
Turn lower disk 5 times to the right; the B-component is now released. Shake
the can at least 20 times with the valve pointed downwards.
Apply foam applicator onto the valve. Extrude the foam with the valve
pointed downwards. The extruded foam must be uniformly light green. If
necessary, repeat shaking. Fill the joint for 50% as the foam will expand.
Empty the can in 5 minutes, after this period the foam will cure inside the
can. Repeat shaking regularly during application. If you have to work in
layers repeat moistening after each layer. Fresh foam can be removed using
Soudal Foam cleaner or acetone. Cured foam can only be removed mechanically.
Working temperature 5°C to 35°C. (20°C-25°C recommended)
REMARKS
- Once the 2 components are mixed, empty the can completely within 5
minutes
- Always moisten surfaces in order to improve curing and cellular
structure
- Cured PU-foam must be protected from UV-radiation by painting or
applying a top layer of sealants (silicone, MS Polymer, PU and acrylic)
Technical Data sheet
