Portland 10mm Shower Panel Sample (Pack of: 1 | Roomliner)

This is a cut sample of: Portland 10mm Shower Panels (1m x 2.4m) Roomliner Portland 2.4m panels are an ideal alternative to tiles. The 1 metre wide boards allow for fewer joints, making them perfect for shower enclosures. These panels are waterproof, easy to fit, durable and hygienic, they are suitable for any room in the home, office or commercial building.
  • Suitable for use in rooms that reach up to 60 degrees celsius.
  • Affix to a clean flat wall, ceiling or over existing tiles with a solvent free/moisture cure adhesive or neutral cure silicone.
  • Fix to damp or damaged walls by fitting 38mm x 19mm battens horizontally at 400mm centres and a breathable membrane is recommended.
  • Can be fitted behind radiators and hot water pipes.
  • Can be installed behind a gas or electric hob if protected by a piece of heat resistant glass.
More Information
Use With Walls (specifically shower walls), and ceilings.
Dispatch Time (working days) 5
Product Condition New
Storage Advice All of our products should be stored flat, out of direct sunlight and all courier packaging must be immediately removed.
Brand Colour Portland
Colour Grey
Nearest Colour Standard No nearest equivalent
Brand Roomliner
Thickness 10mm
Width 1,000mm
Length Sample
Seam Flush
Effect Stone
Finish Matt
Material PVC
Pack Size 1
Write Your Own Review
You're reviewing:Portland 10mm Shower Panel Sample (Pack of: 1 | Roomliner)
Portland 10mm Shower Panel Sample (Pack of: 1 | Roomliner)
Portland 10mm Shower Panel Sample (Pack of: 1 | Roomliner)
National Plastics is a trading name of Specialist Building Products Limited, a wholly owned subsidiary of the Epwin Group Plc. Specialist Building Products Limited is registered in England & Wales. Company Registration number: 1268689. Registered Office: 1B Stratford Court, Cranmore Boulevard, Solihull, B90 4QT VAT Registration No. 864 4507 10