Portland 5mm Bathroom Panel Sample (Pack of: 1 | Roomliner)

This is a cut sample of: Portland 5mm 250mm x 2.6m panels

These PVC bathroom panels from Roomliner are a great alternative to tiles. Can be used for simple and hassle free fitting and care and are a fraction of the cost when compared with tiling

  • Suitable for use in rooms that reach up to 60 degrees celsius.
  • Affix to a clean flat wall, ceiling or over existing tiles with a solvent free/moisture cure adhesive or neutral cure silicone.
  • Fix to damp or damaged walls by fitting 38mm x 19mm battens horizontally at 400mm centres and a breathable membrane is recommended.
  • Can be fitted behind radiators and hot water pipes.
  • Can be installed behind a gas or electric hob if protected by a piece of heat resistant glass.
More Information
Use With Walls and Ceilings
Dispatch Time (working days) 5
Product Condition New
Storage Advice All of our products should be stored flat, out of direct sunlight and all courier packaging must be removed immediately to prevent warping
Brand Colour Portland
Colour Grey
Nearest Colour Standard No nearest equivalent
Brand Roomliner
Thickness 5mm
Width Sample
Length Sample
Seam Flush
Effect Stone
Finish Matt
Material PVC
Pack Size 1
Write Your Own Review
You're reviewing:Portland 5mm Bathroom Panel Sample (Pack of: 1 | Roomliner)
Portland 5mm Bathroom Panel Sample (Pack of: 1 | Roomliner)
Portland 5mm Bathroom Panel Sample (Pack of: 1 | Roomliner)
National Plastics is a trading name of Specialist Building Products Limited, a wholly owned subsidiary of the Epwin Group Plc. Specialist Building Products Limited is registered in England & Wales. Company Registration number: 1268689. Registered Office: 1B Stratford Court, Cranmore Boulevard, Solihull, B90 4QT VAT Registration No. 864 4507 10