Zest wall panels are the perfect combination of style and practicality. They are also extremely easy to install. This blog will take you through the process of installation from what tools you'll need and how to prepare your walls to measuring, cutting, and fixing your new Zest wall panels, hopefully resulting in a professional, seamless finish.
Tools and Materials You'll Need
To install your new Zest wall panels using adhesive, you will need the following tools and materials:
- Either a hand saw, circular saw or jigsaw all with a fine-tooth blade
- Stanley knife
- Tape measure and pencil or marker
- Adhesive and adhesive gun
- Spirit level
- Wall Panels
Step-by-Step Guide: How to Install Zest Wall Panels
Once you have your tools and materials, you can start installing your new wall panels.
Step 1 - Prepare the Wall
Before you start your installation, you need to prepare your walls. Start by removing any debris, screws and nails. You can then clean the surface with a damp cloth. It is important to ensure that the wall is completely flat, even, and dry before you start installing your new Zest panels.
Step 2 - Plan Your Layout
Planning your layout and where you want your panels to be placed may sound obvious, but it's a very important step. Once you know where you want your panels to go, you need to measure the wall. Do this by measuring the height and width of the area where you plan to install the wall panels. Mark these measurements on the back of the panel to denote where you need to cut.
Step 3- Cutting the Panels
Once you have measured the installation area, cut your panels to the required size. Take your time when measuring and marking to help ensure an accurate fit. If you are installing multiple panels in a run, it can be helpful to consider where the final panel will finish before making any cuts. Careful planning at this stage will help achieve a neat, professional finish and minimise waste.
Step 4 - Applying Adhesive
Once you've made your cuts and have placed the panel in situ without adhesive and are happy with the fit, you can apply your adhesive. We recommend applying this in a zig zag pattern on the back of the panel, ensuring it is evenly spaced. A top-quality grip and grab solvent free adhesive is a good choice for this type of wall panel installation.
Step 5 - Fitting the Panels
Once the adhesive is applied, you can lift the panel into position maybe with a little bit of help! Starting in the corner of the room or at the edge of the installation area, carefully position your first panel and check it is level before securing it in place. Make sure you keep it straight as you press it against the wall and apply gentle pressure to ensure the adhesive adheres. Now, hold it in place to allow the adhesive to set. After fitting your first panel, check the horizontal or vertical alignment with a spirit level to ensure it is straight. Now you can attach your second panel. However, before pressing the panel onto the wall you need to make sure there is no gap between the panels. Also, it is a good idea to check the vertical or horizontal alignment again after each panel is installed.
Step 6 - Dealing with Sockets & Fixtures
Where panels need to fit around corners, fixtures or other features, carefully measure and mark the required cuts before trimming the panel to size. Taking accurate measurements will help ensure a neat finish and reduce the need for additional adjustments during installation.
Hopefully this step-by-step guide has provided you with an overview of how to install your new Zest Wall Panels. However, if you have any queries about how to install Zest wall panels or would like further information about the Zest range, call our expert team today on 0800 22 77 77.
