Portland 10mm Shower Panels (1m x 2.4m | Pack of: 1 | Roomliner)
Please note, all images are for reference purposes only. Actual colour may vary by batch
- Suitable for use in rooms that reach up to 60 degrees celsius.
- Affix to a clean flat wall, ceiling or over existing tiles with a solvent free/moisture cure adhesive or neutral cure silicone.
- Fix to damp or damaged walls by fitting 38mm x 19mm battens horizontally at 400mm centres and a breathable membrane is recommended.
- Can be fitted behind radiators and hot water pipes.
- Can be installed behind a gas or electric hob if protected by a piece of heat resistant glass.
|Important Information||Due to manufacturing processes, some colour variation can occur between batches. Please retain the batch number found on the product packaging or the back of the panels.|
|Use With||Walls (specifically shower walls), and ceilings.|
|Storage Advice||All of our products should be stored flat, out of direct sunlight and all courier packaging must be immediately removed.|
|Nearest Colour Standard||No nearest equivalent|
|Join||Tongue and Groove|